Every user to have different Wireless password

deanMKD1 · Thu Mar 12, 2015 1:37 am

Hi !

I want to ask you, is possible every user (5-6 users) to have different wireless password when connecting to Wireless AP?

I know that every users MAC adress must be stored in Access list, but dont know how to set different password for every MAC adress. If someone know, please answer to this thread. Thanks.

Thu Mar 12, 2015 7:33 am

If you don't want to involve hotspot, you would need to create a special virtual Ap for each wifi client with its own security profile. You can also maintain access list to bond client with his virtual ap and prevent others to connect.

djdrastic · Thu Mar 12, 2015 7:52 am

You're going to be much better off going either HotSpot or Wireless authentication to a RADIUS server.

sonny · Thu Mar 12, 2015 8:13 am

Just add the private password within the mac address in accesslist.
And set a global password under security tab.

Gesendet von meinem HTC Flyer P510e mit Tapatalk 2

deanMKD1 · Thu Mar 12, 2015 12:39 pm

Just add the private password within the mac address in accesslist.
And set a global password under security tab.

Gesendet von meinem HTC Flyer P510e mit Tapatalk 2

Do you want more explaination how to do that? How to add that "private password" ?
I allready have global password set in Security Profiles. Maybe some image, will better explain, what you meen. I dont want to use Radius or separated VAP for every user.Thanks for answer.

Thu Mar 12, 2015 12:56 pm

Just add the private password within the mac address in accesslist.
And set a global password under security tab.

Gesendet von meinem HTC Flyer P510e mit Tapatalk 2
Do you want more explaination how to do that? How to add that "private password" ?
I allready have global password set in Security Profiles. Maybe some image, will better explain, what you meen. I dont want to use Radius or separated VAP for every user.Thanks for answer.

when you add each customer in the "Access List" menu, you can specify individual password

deanMKD1 · Thu Mar 12, 2015 2:06 pm

How to set individual password?

Allready added in ACL Wireless User MAC, but how to set individual password?

Thu Mar 12, 2015 2:08 pm

Pre-shared key = Wifi Password

deanMKD1 · Thu Mar 12, 2015 2:10 pm

Pre-shared key = Wifi Password

OK, thanks. But when set wireless password, give me this error..

and then..

password was 15 characters long.. Tryed multiply passwords to set, but the same error persist.

deanMKD1 · Thu Mar 12, 2015 10:49 pm

Someone ?? @normis ?

I found this thread: http://forum.mikrotik.com/viewtopic.php?t=34465

Also found this: http://asp24.com.ua/blog/dopolnitelnaya ... rettyPhoto

and follow that tutorial, but error persist.

and the same error show to me. I used long passwords, including letters, numbers etc, but the same error persist.. What to do?? I use RoS 6.20 on my RB2011UiAS-2nHD. I tryed to set this password for me (552HXPgM9WzqpBx) but the same error show to me, short password ? RoS, you must kidding me

deanMKD1 · Sat Mar 14, 2015 12:39 am

After 20 hours none have answer what to do now?

deanMKD1 · Sun Mar 15, 2015 10:55 pm

This is my wireless config:

[admin@MikroTik] > /interface wireless export
# mar/15/2015 21:54:04 by RouterOS 6.20
# software id = XXXX-XXXX
#
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n country=macedonia disabled=no 
    distance=indoors l2mtu=2290 mode=ap-bridge wireless-protocol=802.11
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk eap-methods="" 
    mode=dynamic-keys wpa-pre-shared-key=password wpa2-pre-shared-key=\
    password

deanMKD1 · Mon Mar 16, 2015 3:01 pm

None have idea, how to solve this? Mikrotik support you have the worst support ever made. Shame for you.

marrold · Mon Mar 16, 2015 9:07 pm

Looks like you're on an old unsupported version of ROS. Have you contacted support via email rather than moaning on a user forum?

deanMKD1 · Tue Mar 17, 2015 12:23 am

Old ?

Its not too old RoS version dude.. i meen that this is bug in this version. Do you have idea how to solve this ? I dont caontacted via email Mikrotik support yet. What to do now. RoS 6.20 is stable 45 days for me, without problem.

@ZeroByte maybe you?

czolo · Fri Mar 20, 2015 4:28 pm

to deanMKD1
Try to type it in terminal than in Winbox.

Fri Mar 20, 2015 4:31 pm

leave private key "none", just enter the passphrase in the "pre shared key"

deanMKD1 · Fri Mar 20, 2015 11:07 pm

Ok that worked normis. thank you for responce.

PackElend · Sat Jan 01, 2022 11:38 pm

You're going to be much better off going either HotSpot or Wireless authentication to a RADIUS server.

do you have a working example?
I try to set up dynamic VLAN assignments based on used Private-PSK.
There is this RADIUS attributes

Mikrotik-Wireless-PSK

which could be used but I cannot find any tutorial or topic using it, so I'm wondering if this is feasible?