I’m monitoring a router using Dude. SNMP ID (6) is the speed of the link. I was wondering how I could go about setting up some sort of a notification to let me know if either the Tx or the Rx on that link was Zero (0). In other words, I’d like to get an email or SMS (this part I know how to do) i…

Not quite that simple. The traffic providers keep on changing the routes out of their data centres depending on load and which international circuits are actually up and running. More often than not.

Hi, eben It is not hard to make such a probe, but it will deffer in Dude 4.0 beta from 3.x So I need to know your Dude version to help you.

Ok. The task is to notify when interface transfer rate on interface index 7 is less than 1Mbit/s (you can change it to whatever) Create 2 functions [1_functions.JPG] [2_functions.JPG] You can change interface index to your. The difference between function is in OID we check. the functions cod…

[4_apear.JPG] [5_apear.JPG] The code of appearance is [Device.Name] If 7 in rate = [If_7_in_rate()] If 7 out rate = [If_7_out_rate()] [device_performance()][Device.ServicesDown] Now you need to create 2 probes [7_probes.JPG] The code for probes is <?xml version="1.0" ?> <dude version="3.6"> <…

Now add services to the device and have a look what happens when the rate is slow [8_probes.JPG] The device is not accessible [9_probes.JPG] \ Do you see the magic? :slight_smile: Hope it was helpful :slight_smile:

gsandul is the man! Quick question though, in the past if you built an IF statement with “-1” for false the dude would consider it a value instead of NULL. Simple just use 0 instead of -1 in your if… bad if(oid(“1.3.6.1.2.1.2.2.1.10.7”),round(rate(oid(“1.3.6.1.2.1.2.2.1.10.7”)*8)),-1) good if(…

Had found 1 issue in probes. <?xml version="1.0" ?> <dude version="3.6"> <Probe> <sys-type>13</sys-type> <sys-id>20437</sys-id> <sys-name>If_7_out_rate</sys-name> <typeID>8</typeID> <functionAvailable>If_7_out_rate() > -1</functionAvailable> <functionError>if(If_7_out_rate() = -1,"SNMP…

Norification if speed on a link drops

RouterOS The Dude

lebowski July 16, 2010, 3:39pm 13

Thanks gsandul - you always make the nicest stuff.

Anyone know how to monitor bandwidth (%) on a cisco router?

Label customization help needed

Dude monitor bandwidth threshold of link