6.13 and simple queues?

[Kreacher]

@savage

Hi,

Is there a issue with simple queues on 6.13?

[cknipe@AMS-CN01-CR01] > /queue simple print stats interval=1
Flags: X - disabled, I - invalid, D - dynamic 
 1    name="test" target=41.79.165.241/32 rate=0bps/0bps total-rate=0bps packet-rate=0/0 total-packet-rate=0 queued-bytes=0/0 
      total-queued-bytes=0 queued-packets=0/0 total-queued-packets=0 bytes=0/0 total-bytes=0 packets=0/0 total-packets=0 
      dropped=0/0 total-dropped=0

There’s PILES of traffic matching that IP address.

However, using interfaces in the target, it works fine

 1    ;;; x
      name="x" target=x01,x02,x03,x04 rate=98.8Mbps/2.2Mbps total-rate=101.0Mbps 
      packet-rate=8483/5521 total-packet-rate=14005 queued-bytes=0/0 total-queued-bytes=0 queued-packets=0/0 
      total-queued-packets=0 bytes=1112035400889/23697822622 total-bytes=1135425236459 packets=766982008/469570498 
      total-packets=1236256592 dropped=269837/28101 total-dropped=134442

Hi Chris,
did you see this? v6.13 released!