Hi, maybe I’m totally stupid but somehow I’m not doing it, so please give advice 
I have two different networks access port - untagged vlan on ether9 (i want tagged vlan 464) and ether5 (want tagged vlan 465) on my mikrotik and what i need to do is trunk port on ether2 and sfp-sfpplus1 with these vlans and my internal network in mikrotik to connect two switch Planet. So i need to planet trunk port VLAN 464,465 and internal (maybe vlan 5) It is possible?
I would add a diagram to help the reader as your explanation is lacking.
I would also state the problem in requirements. What would you like to accomplish for users, without talking about networks, or equipment.
This i want from 2 acces ports to mikrotik trunk port with internal network. On ZTE i cant do Vlans…
Replace your two existing bridges (bridge & bridge_verejny) with a single VLAN-aware bridge, see https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Bridge_VLAN_Filtering and there are many posts on the forms too.
A good reference is this one has examples and when you understand it you are ready to configure!!
http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1
This may also be useful to read as well.
http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1
( I do not know what a ZTE is?? where is your ISP…)