Hello everyone, could someone help me with the following: I have two LHG 5axD antennas, one configured as an access point (AP) and the other as a station bridge. The settings are identical for both devices (SSID, security, channel, etc.), but when pairing the antennas, only one connects, not the ot…

It is not at all clear (to me) what you are reporting. If the two devices are identical and have identical configuration[1], try swapping the mode (make the ap a station-bridge and the station-bridge an ap). If the same device that currently "shows nothing" now shows full Wi-Fi bars (and conversel…

[image] Rgs: LHG 5axD Start with basic config [image] PtP with LHG XL 5 and WiFi package RouterOS Done some test on SXTsq ac, not ax, but whith wifi driver. Master: /interface bridge add name=bri-lan protocol-mode=none /interface bridge port add bridge…

Antenna coupling problem LHG 5axD

RouterOS Beginner Basics

rextended June 12, 2026, 9:35am 3

Start with basic config

then modify what you need, like

antenna-gain=24 (or 25) not 16 on your model