So a dogs breakfast.
Okay if using bridge vlan filtering then please read: http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1
So take the bridge off any subnet duties, simply make it another vlan.
Then come back with that config.
You should consider which vlan is your trusted vlan (and if there is not one then you need a management or base vlan).
Typically you only need three interface lists
WAN-LAN-TRUSTED on the router…exceptions includeumerous vlans with complex firewall rule interactions
You have a mgmt address list but no such list on your config… just bogons
Suggest firewall filter keep chains together otherwise difficult to understand order and also to see errors.
YOur mangle rules are wrong and also not clear why you are using them.
Your routing rules seem very numerous WHY?? what are you trying to do???
Also you have routing rules and one must be very careful to mix them as there can be NO overlap… mangles take precedence over routing rules.
I do recommend taking one port OFF the bridge and doing all my configuration from that port.