CAPSMAN: No 5GHz on CAPSMAN with Netmetal AX, CAP AX works fine

[dksoft]

Before I provide more configuration, a quick question:

I have a dozen of CAP AX (cAPGi-5HaxD2HaxD) working with CAPSMAN (the WiFi one) and they work fine on 5GHZ channel 36 and channel 52 with country set to Germany.

Today I installed a NetMetal AX (L23UGSR-5HaxD2HaxD) for outside and it’s not initializing the 5GHz band with the same setting as with the CAP AX. 2.4GHz is working fine right away.

Any quick idea, what might be the problem here. As said, I am happy to provide more configuration if needed.

Thanks for any input,
dksoft

[holvoetn]

I could be wrong but channels 36 and 52 are indoor channels for Europe.
And Netmetal is an outdoor device.

[holvoetn]

I knew I saw this being mentioned not that long ago:

WiFi AX re-info country missing frequencies?

Hello guys First thanks a lot for all your help and guidance! It makes a lot of sense what you mentioned that is an Outdoor, but a bit sad not be able to change it to be indoor + outdoor I try the command set configuration.installation=indoor for number 0 and number 1, it is added into de configuration I reboot the device but stills the same. Maybe it is “hardcoded” while identify the hardware model Thanks

[dksoft]

@holvoetn

outdoor

Your are good, holvoetn. That was it. Thanks for your help.