Hi,
A few days ago I replaced an old DrayTek 3900 with an CCR1009-8G-1S at one of my customers. Everything started to runner much better but two days ago we found a problem. When I run a network scan application (in this case Advanced IP Scanner) I start to see the all range of IP’s (free IP’s) pointing to the router mac address. If I ping any of the IP that I know don’t exist I get no response.
The problem is that the customer have some computers with fixed IP not used by any other device, that are reporting a duplicated IP and not connecting to the network. There are other devices with IP (special devices to control water pumps) that are reporting a duplicated IP and show the router MAC address as the duplicated IP device. This device can’t connect to the network. I have enabled proxy-arp on the VLAN where this happen because I need VPN access.
My setup is like this: eth5 - WAN, eth6 LAN. On eth6 I configured 6 VLAN’s. For each VLAN I gave an Address, but only configured a DHCP to 2 VLAN’s, one if for wifi and the other one is for eth1 with the default router IP. Current RouterOS is 6.31.
Any help will be apreciated.