https://www.youtube.com/watch?v=EL6IxslKiHs Email your distributor

We are an ISP, and just finally switched off our OC3, so that now both of our upstream providers are 100% ethernet-based IP handoffs. Both 300mb. Question, our Sr Engineer that manages our core, says we can move to one of these “Cloud Core Router” by Mikrotik. We are currently using rack-mounted Cis…

Really, don’t compare Cisco 7600 to CCR. :wink: I don’t want to say anything bad about Mikrotik but I had 7600 as a edge router with about bandwidth 2 Gbps usage with BGP via 5x1Gbit uplinks to internet. Almost no problems in many years. Now we have ASR 9006 as a edge router. 1,5 year with no proble…

Wispwest: We run an ISP in Caracas Venezuela. We have CCR running flawlessly in NOTA (Nap of The Americas) in Miami, running BGP with Cogent, HE and Level3 (1Gig port each). No issues. We also have multiple CCR running in many POP in Caracas. For running multiple BGP feeds, CCR runs like a Champ.…

I have one CCR 1036-12G-4S and works fine until I turn on hotspot. But when I turn on hotsspot it crashes (after reboot log says “router was rebootet without proper shutdown,propably kernel failure”) it reboots sometimes 10-15 minutes ahter turning on hotspot,sometimes work up to 2 hours… tried all …

After the upgrade to version 6.6 from 01.11.2013, constantly reboots after the connection of users PPTP. Disabled access to the CCR for users to reboot stopped. But now I can not roll back the firmware. It just does not roll back.

Could you tell us please how many full BGP tables you have and how long you update full table? For RC software it was about 3-4 minute for 1-2 full BGP tables.

I disabled LCD, and after 3 days I had only one flap port issue. Only one porte went donw and then up in 3 secs. Before I had all the ports going down/up at the same time. Running 6.5 The latest 6.6 or 6.6rc1 is not usable because the router reboots as soon as it get traffic regards Ros

We use the official version 6.5 for CCR-1016-12 ( test bench ) for OSPF and MPLS / VPLS. Problems with falling ports and reboots are not experiencing.Now test MPLS cloud loaded 1.5 Gbps aggregate bandwidth. [Скриншот 2013-11-04 11.05.56.png]

Anyone having drop outs on the CCR after a month or so of up time? We are… reboot fixes it instantly.

CLOUD CORE ROUTER

Hardware MikroTik hardware general

ununium November 3, 2013, 2:29pm 1064

Try setting the router to factory defaults and try the downgrade. That’s how I had to do it.