UPDATE 3/12:
Appears 2.13 stable is available from the update tab on SwOS gui only (hasnt been posted to Mikrotik downloads section yet). So far so good
Since there is different firmware between this model (CSS610-1Gi-7R-2S+OUT) and the other (CSS610-8G-2S+IN), I figured its most appropriate to separate the SwOS release tracker threads from the other CSS610-8G-2S+IN SwOS release tracker thread as there’s differing RC versions between the two as well.
Ive gathered all the DL links from this thread. I figure Ill post them all as there may be some features that were broken when others were fixed in later versions.
If anyone finds new RC’s, please reply and ill update this post accordingly
CSS610-1Gi-7R-2S+OUT versions only
2.13 RC5:
https://box.mikrotik.com/f/089b908aede040b099c8/?dl=1
2.13 RC6
https://box.mikrotik.com/f/a72e315282d149eda481/?dl=1
2.13 RC12:
https://box.mikrotik.com/f/6321df1cdb1b42708c6a/?dl=1
VLAN config instructions as of RC6
As for the VLANs, I would suggest trying these settings:
- Disable the “Add Information Option” under the System menu
- For access or untagged ports, use “VLAN Mode = optional”, “VLAN Receive = only untagged” and specify the “Default VLAN ID”.
- For the trunk or tagged ports, use “VLAN Mode = strict”, “VLAN Receive = only tagged”.
- Make sure to include all the necessary member ports for each VLAN ID under the VLANs menu.
In case you are using tagged VLAN for the device management, I would also recommend using a static IP configuration:
- Set “Address Acquisition = static” and configure “Static IP Address = x.x.x.x”.