Different vlan combos per ethernet interface

RouterOS Beginner Basics
1

Hi,

I’m using 3 vlans (6, 8, & 10), which were all created under the Ethernet2 interface. I know I can make the other Ethernet interfaces slaves to Ethernet2 and they will have all the vlans present, but how do I add only certain vlans to certain ethernet interfaces?

For example, I want:
Ethernet2 to have all three vlans (6, 8, 10).
Ethernet3 to only have vlan 6 & vlan 10.
Ethernet4 to only have vlan 6
Ethernet5 to only have vlan 6 & vlan 8

Can’t seem to figure it out. Any info shared would be helpful.

Thank you.

2

Your saying you want these ports to accept and transmit only certain vlan combinations?

You will need to do this in the switch menu by configuring which VLANs are allowed on which ports.

http://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Example_-_802.1Q_Trunking_with_Atheros_switch_chip_in_RouterOS_v6