DNAT stupid entry

RouterOS General
1

For some tests I’ve add a rule like this

 ip firewall nat add chain=dstnat protocol=tcp dst-port=0-65535 action=dst-nat to-addresses=10.10.10.10 to
-ports=0-65535

so… after this I lost a connection to this router of course. Any ideas about how to disable this rule and/or restore managment on router without console login?
Any additional information will be provided on demand :slight_smile:

2

use serial console to access router

3

use MAC WinBox (if you have direct access to the router) or MAC Terminal (from the neighbour MT router)

4

MAC telnet rulls :slight_smile:
10x