First time setting up bridge-based VLANs, can't get traffic to/past trunk port

[anav]

• ether1 on Fortigate 60F hands out DHCP to all devices in VLAN 10 with 172.16.63.0/24 addresses
• ether2 on Fortigate 60F hands out DHCP to all devices in VLAN 10 with 172.16.64.0/24 addresses
• ether3 on Fortigate 60F hands out DHCP to all devices in VLAN 10 with 172.16.65.0/24 addresses
• ether4 on Fortigate 60F hands out DHCP to all devices in VLAN 10 with 172.16.66.0/24 addresses

Bridge vlan filtering works well…
http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1

If you are attempting the switch chip method…some guidance
P. SWITCH CHIP VLANS
https://help.mikrotik.com/docs/display/ … +Switching
https://help.mikrotik.com/docs/display/ … switchchip
https://www.youtube.com/watch?v=Rj9aPoyZOPo - Vlans using the Switch Chip
https://www.youtube.com/watch?v=rvQ6o4RfnoU - Configure Vlan on Switch Chip
https://www.youtube.com/watch?v=YLtGQAQ8iS0 - CRS3XX Step by Step