The configuration seems incomplete, to use the switch chip you have to create a bridge and add the ethernet ports to it. Additionally you cannot add IP addresses or services to child interfaces.
The basics are covered in https://wiki.mikrotik.com/wiki/Manual:Switch_Router and https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Setup_Examples, however if you do not need wirespeed switching between ports configuring the bridge to be VLAN aware is less involved as covered in https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Bridge_VLAN_Filtering and this comprehensive forum post http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1