How to leave a free subnet in hotspot

RouterOS General
1

I have a RB1100AHX2.
To port “ether1” (IP 192.168.1.1/24) is a ADSL conection and a hotspot is activated to port “ether2” (IP 192.168.100.1/24), that provides internet to the local network (LAN).
In the same LAN also exists a subnet (10.0.0.1/24). In that subnet there is a PC and some other devices (cameras, access points, etc).
From the moment I actvated the hotspot, I lost the connection between the PC and the rest of the devices.
Is there any way of excluding this subnet(10.0.0.1/24) by configuring the hotspot in a way so that in this spesific subnet communication between my PC is permited.

Thaks in advance.

2

You can bypass the pc and another devices from hotspot with ip binding option.

sent from my mobile phone using tapatalk

3

Dear c0d3rSh3ll thank you for your reply.

I have already binded all the devices.
It works only for internet trafic through the router. For example if i “ping” to any of the devices from the PC, eventhough I have binded all these devices, I get no response.
What I need though is the communication between a local PC and some other devices that are on a different subnet(10.0.0.1/24).
It would be very important to me if there was a way of excluding the whole subnet from the hotspot’s blocking system.

Thanks again.

4

You can also add the IP block on the walled Garden IP list so that hotspot users can access the IPs without logging in.

5

Dear nerdtron thank you for your reply.

I think “Walled garden” is not giving free comunication between all theese devices.
I need to have full free communication between all devices Localy, for the specific subnet.

Any other idea please?

Thanks

6

I have done exactly the same setup.
Put in Walled garden Ip List in Src.Address 10.0.0.1/24.