Hello,
Let me say this first: I’m thoroughly noob.
I’ve gone through a lot of topics that are related to problems with 3G of 4G modems; but they’re just “Problems”.
I just need a complete walkthrough to help me set this LTE modem up and use it.
My dongle is a Huawei E3372 4G modem and I’m using an RB951Ui.
Thanks for your replies.
Have you updated the RouterOS to 6.35.2 ?
Do you see the lte1 interface in the interfaces list?
update your modem firmware to hilink mode and just plug it you will see lte1 interface (if not reboot ur rb951) then u just need to add dhcp-client for lte1 interface and NAT your network
When the modem has no hilink firmware I would recommend not to change that, as the other
firmware has the advantage that you will not be behind another NAT.
I have hilink firmware but I would prefer the other, however it is too complicated to change it.
Yes, the version is 6.35.2.
Yes again. The lte1 appears in the interfaces list.
What’s next?
I have tried this method and it works; but seems not to be a proper solution.
I just feel that there is a lot of unstability in terms of connection speed rather than connecting the dongle directly to my pc/laptop. Any ideas?
When you have the lte1 interface you should add a DHCP client to that interface.
Then it should all work.
Cuz RB951 USB does not have enough Power for this modem ( i have same problem that lte1 interface disappear when i start download ) so you must use USB Powered HUB or use RB2011
Yes! That’s exactly my problem. The modem seems to disconnect after some time and it won’t reconnect again until I replug it in or reboot the routerboard.
What usb hub model do you suggest? The problem is WAY annoying 