hi
my radius server send rate to mikrotik with SSH and user conneted with PPPOE connection
now all users connected successfully and use internet
1 : with version 6.0 … 6.7 after 2days ppp users cant be conneted
2 : with version 6.8rc1 all user connected after 20min logout from radius but stay connected in mikrotik
Any fixes likely for sstp ?
It is incapable of staying up for more than a day, compared to pptp.
Usually, both ends claim the other one disconnected or timed out.
I’ve ditched sstp and reverted to pptp, which is not considered as secure.
When the sstp is replaced, on the same hardware, it then can stay up for typically 30-60 days.
repost from the 6.8rc1 thread
Can confirm I got another ~200 mbps while torrenting on my 1gbps connection running routeros 6.8rc1 under ESXi on a Celeron G1610T (sole VM, ~70% cpu load, pppoe connection, ~60 firewall rules).
serious problem with PPPOE SERVER bridge and when client disconnects, the other customers mikrotik drops after 20 seconds, problem with BCP, in all versions,. customer who left hung equipment, and the right client mikrotik disconnected, after 20 seconds than the other turned off the device.
Hi all,
I have strange issue, cannot access my clients CPE by IP provided from pppoe pool,I can ping ,traceroute but no access to CPE GUI.
I am using RB1100AH v6.7 with 2WAN ,loadbalancing PCC and pppoe server on same router.
Please help,
version 6.9 no problem and works very goooooood