Enterprise Fixed Public IP, Not Dial up, Not mobile phone connection, It all comes suddently, “Limited Access”, even restore the backup generated before this happened. The error won’t go away… What happened? Is it really ISP blocking something ? Customer support told me nothing changed. [image] …

Do you have Detect Internet active by any chance? I suspect it comes from there. I am still looking to find someone actually finding that feature useful. I always switch it off.

Yeah, Detect Internet brings many problems and should not be used. But OP is using the mobile MikroTik app, and that app prominently tells its users to turn on Detect Internet if they want to see that fancy traffic graph on the home page that you can see in the screenshot above.

And not so casually it is Rule #5: [image] The twelve Rules of Mikrotik Club Beginner Basics Preamble and disclaimer: The following is a set of Rules that are intended as advice useful to avoid the most common errors observed in configuration posted on this forum. It is …

I started seeing “(limited access)” since yesterday. I admit that I made a few small configuration changes yesterday but nothing even remotely related to this. I have a stable and fast fiber connection on ether8/vlan6/pppoe. I am able to open UDP connection to cloud.mikrotik.com on port 30000 on my…

The presence of *C means plainly that you had there an interface that has been either deleted or renamed, the RoS cannot find It anymore and uses a reference formed by asterisk and a hex number. That is point #21 in GP&CSA: [image] GP & CSA for Mikrotik devices Beginner Basics …

I think this must be some wider scale issue, as I started having the same on my Mikrotik app this morning. Before this morning, this was green and did not say Limited access. I have made no changes from yesterday to today. Everything still appears to be working for me, so I’m not sure exactly wha…

I’m also seeing this message on my iOS app

[image] holvoetn: Do you have Detect Internet active by any chance? I suspect it comes from there. Yes, of course it must be on to get the flow diagram. However, the Internet detection works fine until a few days ago it suddently shows “limited access”. It makes me a little nervous, i had t…

[image] CGGXANNX: Detect Internet if they want to see that fancy traffic graph Yes, that’s why i made it on, but now i turn it off, after many troubles, restore my CCR1036 firmware, and even restarted several servers…

[image] COden6484: I think this must be some wider scale issue, as I started having the same on my Mikrotik app this morning. Before this morning, this was green and did not say Limited access. I have made no changes from yesterday to today. Everything still appears to be working for me, so I’m …

Internet-Available-On-Sfp1-Limited-Access

RouterOS General

jaclaz July 9, 2025, 6:21pm 4

And not so casually it is Rule #5:

But I might need to correct the corollary stating that its ONLY practical use is that of creating fancy graphics on the mobile app …