IPSec does not send all trafic thru VPN server

RouterOS Beginner Basics
1

Hey there,
I have RB951Ui-2nD client that is connected to StrongSwan server thru pure IPSec IKEv2. When a peer is active all traffic goes thru the VPN server by dynamically created policy. For example, src. 10.5.0.1/32 dst 0.0.0.0/0 where 10.5.0.0/24 is a pool from the VPN server, as I understand - classic road warrior scenario. But I need only access to the VPN server, I don’t need it as a gateway.
So, the question is how it could be configured to route traffic thru IPSec, only when destination is VPN server?

2

Is it so hard?

3

Then set desired IP address as Split Include in mode-config

4

split-config or like this.

5

Thanks! Will try.

6

Didn’t find a split-config for a non responder(maybe just misunderstood).
But it works fine with mangle → mark connection and then specify it in a mode config.