L2TP Disconnect after a while

[atmane]

Hello Mikrotik Community.
I set up a L2TP server with a RB3011Uias (ARM) and the client was a PLANET VDR301n.

The tunnel only work for some while 1 to 2 houres and switch down, the problem is that the tunnel can not be up automatically !!! I have each time to reboot the Client or to re-save the L2TP client configuration !!!

I think the problem is from th Client Planet VDR 301n.

Can you please suggest a sollution or suggest a new router L2TP/client (not expensive) that is able to reconnect automatically when the tunnel is down ?
Do you know some brand that it’s fully compatible to be a good L2TP/Client for the RB3011 L2TP/server. ?

[sindy]

Can you please suggest a sollution or suggest a new router L2TP/client (not expensive) that is able to reconnect automatically when the tunnel is down ?
Do you know some brand that it’s fully compatible to be a good L2TP/Client for the RB3011 L2TP/server. ?

The brand best compatible with Mikrotik is Mikrotik And it may be enough to use a $20 hAP mini if the bandwidth requirements are not too high; for higher traffic volumes, I’d recommend the $70 hAP ac² (which may even outperform the 3011 on encryption).