LAN with Public and Private IP Address

RouterOS Beginner Basics
1

Hi,
I’m new with Mikrotik RouterOS. Just bought CCR1009-8G-1S-1S+. Running v6.33.1.
My provider provided me P2P /30 and for my LAN /26 Pubic Subnet. I have created 8 VLANs.

I subnetted /26 subnet (VLSM) and assigned to following VLANs.
101 – Vlan I’m using for Private IP Address 10.10.10.0/24
102 Assigned /28
103 Assigned /29
104 Assigned /29
105 Assigned /29
106 Assigned /29
107 Assigned /29
108 Assigned /29

So far my network is working properly.

I’m using VLAN 102 for my VMWare Guests Public IPs. I’m using VLAN 101 Private subnet 10.10.10.0/24 for my VMWare cluster, ESXi Hosts, iSCSI, HP iLOs etc.

The challenge I’m facing is my Mikrotik Router’s WAN Interface has one of the P2P IP address provided by my provider.
Currently my srcnat masquerade is configure Src. Address 10.10.10.0/24 Out Interface WAN interface and working fine.

I would like to use one of my Public IP addresses from 102 VLAN for my 10.10.10.0/24 internet outbound.

Any kind of help would be greatly appreciated.

Thanks
Dave

2

No one available to help???

3

i think you want to do is a 1 to 1 NAT ?

Or use a different public ip address for that private range range?