LHG LTE6 Slow Performance

[justhrishi]

Show a Celluler tab.

Are you referring to Interface>Lte ? Or any other tab?

LTE Category 6 (300Mbit/s Downlink, 50Mbit/s Uplink)
LTE FDD bands 1 (2100MHz) / 2 (1900MHz) / 3 (1800MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) / 5 (850MHz) / 12 (700MHz) / 17 (700MHz) / 25 (1900MHz) / 26 (850MHz)
LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 39 (1900MHz) / 41n (2500MHz)

Band 5 is only at 2G, not at LTE.

Band 5 is there in LTE too as stated in the list that you have shared. Also I have only enabled LTE under interface. The network provider that I have mentioned (Jio, India) only transmits in LTE signal.

When testing at various locations, CA sometimes works when connected to Band 3 & 5 but never works when connected to Band 40. Cell Locking to Band 40 didn’t work and LTE didn’t register any bands until I removed Cell Lock.

Enable logging of LTE, regular logs.

/system logging action add memory-lines=10000 name=lte target=memory
/system logging add action=lte prefix=DIAG__LTE6 topics=lte

Enabled logs as per instructions and logging has started.

Upload a lteLogger2.rsc to your ros and do /import lteLogger2.rsc;
You see new scheduler&script items what are software watchdog for script lteLogger2 - it keeps that script is still running.

• RouterOS v6 ros6-lteLogger2.rsc
• RouterOS v7 ros7-lteLogger2.rsc

Tried to import lteLogger2.rsc after uploading to device but I’m getting the following error
syntax error (line 41 column 7)