Link Information from both Routers on a ptp-link

RouterOS The Dude
1

Hi,

I would like to see tx/rx errors from both sides of a ptp-link
on the link. So I need snmp-variables from both routers.

Can this be done?

Stefan

2

If that info is available through SNMP, you can look for it by doing a ‘SNMP Walk’.

3

The info is available. My problem is to place infos from 2 routers
on one link.

4

Ah, that’s a problem :slight_smile:

Wat you could do is split the link up into two parts with a (empty) ‘cloud’ device in the middle. Essentially you than have two links, but hey. Not pretty, but perhaps workable.