I have problem with Rb on one of our installations, both links (to public and to local) goes link down and link up like in 2 seconds.
Except this in log is not anything that could cause this.
Eth 1 is WAN and Eth 2 is local TP-link switch, if one of them was dropping, but both at the same time?
Is there a posiibility of Rb being damaged or something like that?
07:58:31 system,info,account user admin logged out from 90.180.6.212 via winbox
08:00:09 interface,info ether1 link down
08:00:09 interface,info ether2 link down
08:00:11 interface,info ether1 link up (speed 1G, full duplex)
08:00:12 interface,info ether2 link up (speed 1G, full duplex)
08:00:17 system,info,account user admin logged in from 90.180.6.212 via winbox
It logs me out, local network drops, then it makes linkdown, link up and connects me again.
Ok I don’t know about link up/down problems on that model and RouterOS version.
I guess I would try checking the power adapter (try another one if you have it).
Are these two links to two different devices? E.g. an internet connection or modem and a local computer or switch?
If so, the cause must be from the inside. If it is not the external powersupply, it probably is a defective router.
The RB951G is normally quite dependable and not one of those new architectures where there sometimes are problems like this.