Lost in setting up router

RouterOS Beginner Basics
1

All,

I’m totally new to mikrotik - more experienced with cisco.
Therefore I started with a small Hex S device (RB760iGS).
After 3 days and reading many online documents I’m lost in setting up router like required.

Plan is to have Hardware connected like this:
Carrier router providing internet access over a bridged port => RB760iGS connected with 1"trunk+tagged VLAN" => cisco access switches

Purpose of the RB760 running on latest stable OS (6.44.1):
Provide appr. 10-15 VLAN each with DHCP-Server
Allow access between VLAN + Access through firewall rules
Generally firewall internet-access
(This was plan to get rid of the Cisco RV130 which is only supporting max of 4 VLAN.)

I could manage mostly all. on the HexS. Major issue for me is, I’m not able to figure out how I can create the DHCP-Servers for different VLAN on the same tagged port.
I tried to add DHCP-Servers to Bridge, ethernet-interface as well on VLAN nothing seems to work finally. Is this a limitation of the router firmware or hardware?

Would appreciate your input or guidence to an example where 10x DHCP-Server/VLAN are used on one tagged/trunk-port.

greetings from
bigquestion

2

Check the manual and examples. In short, you define ports and VLANs in “/interface bridge port” and “/interface bridge vlan”, which is enough for switching. And if you need to work them more (e.g. in your case add DHCP servers), you add VLAN interfaces in “/interface vlan” and work with them. Read and understand example #3 and you’ll know what to do.

3

We are here to help, all doable!
Besides the link that Sob Provided there is excellent guidance on this post with practical examples…
http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1

Once you have attempted to apply the knowledge from the links and have a config for us to look at
post it here… ( i use notepadd ++ to read downloads of files from the router).
/export hide-sensitive file=yourconfigmar16