LTE KIT - ether1 (WAN) LTE (WAN) wlan1 (LAN) Failover

[careonecomm]

You have few options.

Easier method is to set a optional route in APN setings of LTE. Your ether1 have own RecursiveRoute checked path as main ISP.
This way your ether ISP can be main and lte will be used automatically when ether not pass to internet.

Opposite way is harder, to make lte1 as main in RecuRouting and backup to ether1. Dynamic interface cannot be used in RR way .

You not write clear, what of this scenario you want use, or I not understand that. Please, clear your idea.
btw, I hope that ether1 is a static IP, not dhcp.

Yes the idea is to have ALWAYS ether1 main and lte1 backup (working when ether1 is off or not able to reach certain hosts like the failover example in confluence)

ether1 public Dynamic

I was using this script to generate the routes for ether1, and that seems to work, however I do not understand how to mix this with the general failover idea:

http://forum.mikrotik.com/t/advanced-routing-failover-without-scripting/136599/1

However, I’m fully open to the easiest path to do it.


Thanks