hello
I am inquiring about wireless mesh.
I used 4 RBM11G wireless boards.
I created a MESH on each interface and inserted Ethernet and WLAN1 into the ports.
I created IP 192.168.88.201~204 with MESH device.
For WLAN, we created DYNAMIC MESH WDS and set it up so that everything can be connected to MESH.
We confirmed that all devices were connected wirelessly.
A separate POE switch was used on the board to connect each CCTV camera and PC.
There are cases where PING from PC1 to PC2, PC3, and PC4 does not operate randomly. This happens the same on all PCs.
However, PING works normally with the camera’s IP.
The IP of the PC and camera use the same band.
Additionally, videos from 4 cameras are streamed normally on the PC.
In other words, I would like to know why PING (Request time out) from one PC to another PC behaves unstable.