Hello everyone!
After running several tests with a Mikrotik X86 and then with the same hardware on Debian 12 with accelppp, I ran the following tests:
My Hardware:
Xeon 2670V3 ( HT disable) Processor
Mellanox X4A-acat Network Card
I noticed that RX errors were still occurring on Debian + Mellanox. I wanted to find out what these errors were using the interface monitor in Hardware.
I discovered that these errors are due to Layer 2 packets larger than an L2 MTU of 1518, and the Mikrotik is counting them because the Mikrotik X86 on this card, among others, does NOT have Jumbo Packets (L2MTU) enabled!
As a user who purchased the license, I would like to request that Jumbo Packets (L2MTU) be included on the Mikrotik.
I will attach the Hardware board report here!
The problem has been announced, and I await a solution.
Summary: I need the jumbo packet (L2MTU) enabled on the Mikrotik X86 with Mellanox and if necessary, do it with other boards as well, such as Intel X520-DA2 and Intel X710-DA2
Best regards,
Marcelo