Need Advice on PCC Load Balancing (MikroTik RB450Gx4, RouterOS v7)

[BartoszP]

Hi,

How many times do you want to start the same topic?

PCC Load Balancing Issues on RB450Gx4 – Slow Speed on One AP and Random Disconnect on Another AP

Network Environment Router: MikroTik RB450Gx4 Access Points: UniFi Ubiquiti (model UniFi, operating mode unknown) Load Balancing: PCC (src-address, ratio 13/12) Bandwidth Control: Simple Queue using PCQ DHCP Pools /ip pool add name=dhcp_pool1 ranges=192.168.20.1,192.168.20.3-192.168.20.254 add name=dhcp_pool2 ranges=192.168.10.1,192.168.10.3-192.168.10.254 add name=dhcp_pool3 ranges=192.168.30.1,192.168.30.3-192.168.30.254 DHCP Servers (LAN) /ip dhcp-server add name=dhcp1 inter…

PCC Load Balancing Issues on MikroTik RB450Gx4 (RouterOS v7): UniFi AP SSID Disappears and Performance Degradation

and this my configuration: Network Overview Router: MikroTik RB450Gx4 WAN Interfaces: ether1 → ISP 1 (30 Mbps) ether2 → ISP 2 (100 Mbps) LAN Interfaces: ether3 → LAN 1 (Access Point 2 – UniFi) ether4 → LAN 2 (Access Point 1 – UniFi) ether5 → LAN 3 Access Points: Ubiquiti UniFi (model unknown, mode unknown) IP Addressing Interface IP Address Network ether3 192.168.10.2/24 192.168.10.0/24 ether4 192.168.20.2/24 192.168.20.0/24 ether5 192.168.30.2/24 1…

Closing.