Need support in hairpin (port forwarding)

RouterOS Beginner Basics
1

I have network schema very similar with http://wiki.mikrotik.com/wiki/Hairpin_NAT

my webserver on IP 192.168.10.10
subnet for all local PCs 192.168.10.0/24
router IP local adress 192.168.10.1


my nat configuration

  0    ;;; HTTP for external
      chain=dstnat action=dst-nat to-addresses=192.168.10.10 to-ports=80 protocol=tcp in-interface=ether1-gateway dst-port=80 log=no log-prefix="" 

 1    ;;; default configuration
      chain=srcnat action=masquerade out-interface=ether1-gateway log=no log-prefix="" 

 2    ;;; hairpin
      chain=srcnat action=masquerade protocol=tcp src-address=192.168.10.0/24 dst-address=192.168.10.10 out-interface=bridge-local dst-port=80 log=no log-prefix=""

From internet my web site accessible, but from local network it doesn’t work. Where is my mistake?