No internet on Vlan's

Hello i am facing an issue that i cannot get internet on Vlan’s (and i cannot ping the gateway)

Here is my config :

/interface bridge
add name=bridge1
add name=bridge2
/interface ethernet
set [ find default-name=ether1 ] name=ether1-WAN speed=100Mbps
set [ find default-name=ether2 ] name=ether2-LAN speed=100Mbps
set [ find default-name=ether3 ] name=ether3-LAN-Cameras speed=100Mbps
set [ find default-name=ether4 ] name=ether4-LAN-WAP speed=100Mbps
set [ find default-name=ether5 ] name=ether5-LAN-2 speed=100Mbps
set [ find default-name=ether6 ] name=ether6-LAN-2-WAP speed=100Mbps
set [ find default-name=ether7 ] speed=100Mbps
set [ find default-name=ether8 ] speed=100Mbps
set [ find default-name=ether9 ] speed=100Mbps
set [ find default-name=ether10 ] name=ether10-MGMT speed=100Mbps
set [ find default-name=ether11 ] advertise=
10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
set [ find default-name=ether12 ] advertise=
10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
set [ find default-name=ether13 ] advertise=
10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
/interface vlan
add interface=bridge1 name=vlan100 vlan-id=100
add interface=bridge2 name=vlan300 vlan-id=300
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp_pool0 ranges=192.168.88.2-192.168.88.254
add name=dhcp_pool1 ranges=192.168.88.2-192.168.88.254
add name=dhcp_pool2 ranges=10.20.50.2-10.20.50.254
/ip dhcp-server
add address-pool=dhcp_pool2 disabled=no interface=vlan300 name=dhcp1
/user group
set full policy=“local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas
sword,web,sniff,sensitive,api,romon,dude,tikapp”
/interface bridge port
add bridge=bridge1 interface=ether2-LAN
add bridge=bridge1 interface=ether4-LAN-WAP
add bridge=bridge2 interface=ether5-LAN-2
add bridge=bridge2 interface=ether6-LAN-2-WAP
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ip address
add address=192.168.88.1/24 comment=defconf interface=ether10-MGMT network=
192.168.88.0
add address=192.168.4.9/24 interface=ether1-WAN network=192.168.4.0
add address=10.20.50.1/24 interface=vlan300 network=10.20.50.0
add address=10.0.0.1/24 interface=vlan100 network=10.0.0.0
/ip dhcp-server network
add address=10.20.50.0/24 gateway=10.20.50.1
add address=192.168.88.0/24 dns-server=1.1.1.1,1.0.0.1 gateway=192.168.88.1
/ip dns
set servers=1.1.1.1,1.0.0.1
/ip firewall nat
add action=masquerade chain=srcnat
/ip route
add distance=1 gateway=192.168.4.1
/system clock
set time-zone-name=Europe/Athens

The Config is a bit confusing…
Do you have a Network-Diagramm or a small description of you network?


I would normally expect only one bridge with vlan-filtering
See VLAN-Bible : http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1

Post your entire config
/export hide-sensitive file=anynameyouwish

the current config is a mess.

ONLY ONE BRIDGE
USE ALL VLANS
every vlan is identified with interface bridge upon creation
every vlan gets an IP pool, IP address, DHCP server, DHCP server network
follow the link provided