Some time ago I read on mikrotik manuall that there is no way to bridge the nstreme dual connection.
I found test results of rb112:
http://www.mikrotik.com/download/rb112test.pdf
There is a results
“Nstreme DUAL between RB112 conn-track enabled, bridging !!”
I have never tried to bridge the dual nstreme.
Is it possible ?
Simple nstreme works great in bridge with wds.
Regards
Marcin
you can use bridging in nstreme2. can you point me to the spot in the manual where it says that you can’t ?
Bridge does not equal to WDS. WDS links is not possible on Dual Nstreme links, however bridge on the Dual Nstreme link should work fine.
Upss … I read it wrongly.
There is only information about using WDS.
“WDS cannot be used together with the Nstreme-dual”
[/url][http://www.mikrotik.com/testdocs/ros/2.9/interface/wireless.php[url](http://www.mikrotik.com/testdocs/ros/2.9/interface/wireless.php[url)]
It is a great news to me !
Currenlty I have the following situation:
network === ap(p4) —simple nstreme with wds bridged —ap(p4)=== network.
So I can change it easly 
and save the bridge between the networks.
Regards
Marcin