NTP Client Cannot Update

RouterOS Forwarding Protocols
1

Dear Friends,

I running RB450G, v3.27, i already set ntp client and make it enable and fill NTP server with this 202.155.61.54, but the router doesn’t want update the time when reboot.

please advise me if there is any port to open, what port and how to open it ?
or what should i do to make my router syncronize automatically when reboot?

[admin@Viestacom] /system ntp> client
[admin@Viestacom] /system ntp client> pr
enabled: yes
mode: unicast
primary-ntp: 202.155.61.54
secondary-ntp: 202.155.61.54
poll-interval: 16s
active-server: 202.155.61.54

thanks folks,
Erwin

2

after i discuss with a friend in this forum, the result is my ISP blocking NTP port (123). isn’t that weird ?
i have to make my computer as NTP server and the router will syncronize to my komputer.

does anyone know the software to do that ?

3

If your ISP is blocking port 123 you’ll have to either tunnel out, find an NTP server that doesn’t run on port 123 or run your own external NTP server not on port 123.