on ROS 4.0 and 4.1 eth2 and eth3 not working on RB433UAH

HaQs · October 17, 2009, 11:08am

Hi

On 4.0rc1 work ok but on 4.1 and 4.0 eth2 and 3 not working on RB433 UAH

On RB433AH all ethernet work ok with ROS 4.1

tigreferoz · October 17, 2009, 9:04pm

Confirmed, RoS 4.0 and 4.1 eth2 and eth3 not working on RB433UAH. I have 10 RB433UAH and not working in all. HELP PLEASE¡¡¡¡¡¡¡¡

mato · October 19, 2009, 4:15pm

Confirmed too, eth2 and eth3 not working on RB433UAH after update to 4.1 version.

Ibersystems · October 19, 2009, 4:43pm

Send this to support : P!

alphalt · October 24, 2009, 10:16pm

Hi,

I have RB433AH (not UAH), but in my case eth2 and eth3 is not working with v4.1. It was no problems with v4.0 RC1. I have found that this problem has something to do with switch option. I can see that both eth2 and eth3 are used in switch, but I have no chances to change something in switch - I get error that its not implemented. I asked for support request. Hope to get and answer from them.

Regards,
alpha

roc-noc.com · October 24, 2009, 11:13pm

FYI Support has confirmed this as a bug and it will be fixed in ROS 4.2.

Tom

nz_monkey · December 20, 2009, 10:10am

I am running 4.3 on a RB433 and this problem still exists.

Confirmed via a laptop on eth2 and eth3, cannot ping interface IP’s.

RB433, RouterOS 4.3, Firmware 2.23

Sitron · December 20, 2009, 2:32pm

I can confirm that v4.3 has this problem too, but downgrading to v4.2 fixed it!

alphalt · December 20, 2009, 3:24pm

Same here. Downgraded to 4.2. Support confirmed that bug exists in 4.3. We should wait for 4.4.

nz_monkey · December 21, 2009, 2:06am

Yeah, not a major for me at least it was a clear cut bug. Looking forward to 4.4

Andrew

normis · December 21, 2009, 8:08am

It’s already released before you posted this post.

nz_monkey · December 21, 2009, 8:28am

lol, thanks Normis

Gmail is hiding the announcements from me…