Ping

nicmo · October 26, 2010, 6:02am

Hi, I am doing a ground test with RB411ar as AP and RB411 as station mode, I can ping my internet gateway from RB411 wireless in winbox but not from PC. I got DHCP IP for the pc from the internet router through ether1 on RB411 bridge to the AP.

cieplik206 · October 26, 2010, 8:02am

Have you configured masquarade ?

If yes and its still not working copy and paste config here,

nicmo · October 28, 2010, 6:08am

How to configure masquarade and how to copy the configuration?

ojiex · October 28, 2010, 7:21am

Dear Sir,

For masquerading packet from your local network , you can setup a new rules from IP firewall NAT . TIA

Best Regards,

Ojie Nugraha

nicmo · October 28, 2010, 4:47pm

In winbox go to IP>Firewall>NAT>Action>Masquerade ?
Should I do this on both AP and Station?

Nicmo

nicmo · October 31, 2010, 9:22am

Hi I found out that when i was pinging through winbox it was on Any interface. The only interface i can ping my internet gateway from is the bridge none of the others worked. Any suggestions??

Thanks in advance.
Nicmo