PPPOE upload limit not works with "Use IP Firewall For PPPOE" enabled

RouterOS General
1

On CCR1072 + v6.38.3

I have pppoe server on a bridge, and when activate “Use IP Firewall For PPPoE” on bridge settings, upload limit not works. If I disable it, it works fine. I think that this option must be enabled.
Why fail?

2

Does your queue which should be limiting this traffic has target specified? If it is set to 0.0.0.0/0, then please set it to anything else (local subnet or IP address in most cases).

3

Hi,
simple queue is created dinamically by pppoe-server, but upload-rate-limit not work.
I can see in dynamic pppoe interface the upload traffic, but it is not registered by the dynamic simple queue (upload) of this interface

4

Please send supout.rif file from your device to support@mikrotik.com. Describe the problem or refer to this topic and name which interface is not properly limited.

5

I will send it in a few days. Actually this core is working and to generate .rif file, sometimes cause a reboot of CCRs.
In the next night maintenance, we will create the file .rif