Problemas CUBE 60Ghz

RouterOS Wireless Networking
1

Hello everyone:
I do not know what can happen, and I would like to know, if any forista, or some of the Mikrotik team, can advise me ..
I have mounted several Cube 60Ghz equipment, in my infrastructure, 2 of them connected in 2 Ap of 60Ghz, and 2 more for a direct link.
1st AP
LHG 60Ghz (347 mts)
Cube 60Ghz (150mts) .. This works well for me

2nd AP
LHG 60 Ghz (200mts)
LHG 60 Ghz (250mts)
Cube 60Ghz (86 mts) Malfunctions

PTP Cube 60Ghz 80 meters away. It works poorly

In the case of the cube that is connected to the AP, it gets quite short, the values ​​become unstable, until it is cut. But then it gets up again, to function well. We don’t know what to do, and we don’t know why. We have verified that when traffic does not pass through it, it remains stable.

In the PTP link, the same thing happens to it, it becomes unstable from time to time and it cuts. Then get up and work well. We have observed it when it barely has traffic and the same thing happened to it as the previous one, this one completely stable and without cut

Please, if someone has been through the same thing, or have any idea what can happen. I would be grateful to see possible solutions

Thank you

2

same problem PtMP cube60 to wAP60 360m rssi 63dB link down - link up second PTP cube60 to cube60 520m rssi 57dB link down link up try any firmware link unstable disconnect

3

Hello,
No one on the Mikrotik team knows why this happens. Equipment in production and do you have these serious anomalies? You cannot launch a team having these problems, you lose credibility.

4

I tested link without traffic about 24h all ok no more disconnect link down link up 24h stable then I start traffic link down link up again. Disabling traffic and link again ok without disconnect. Starting BT both direction link disconnecting problem again. On the table I test another 2 units Cube60 PTP BT both direction 5hrs link ok all work fine. Tomorrow I change units outdoor problematic link

5

I tested any other firmware from newest 6.46.6 and now Cube60 on the firmware 6.45.7 4hrs BT without link down link up. Hercules30a try this firmware

6

Thank you …
I will prove it .. Another problem that I am having apart from the cubes, is the APs wAP60Ghz, I thought that they have solved it, but no .. If any of the CPE is minimally altered even if they do not change their state, good because of the passage of birds . The ping of the wAP is also altered. It cannot be that mikrotik presents this serious errors.