Hello everyone, Is there a published cookbook somewhere for creating PtP on a WiFi package? (primarily on LHG XL 5ax) I've tried various things, including instructions from " help.mikrotik.com ", but to no avail... Thanks to the well-intentioned people Regards

Done some test on SXTsq ac, not ax, but whith wifi driver. Master: /interface bridge add name=bri-lan protocol-mode=none /interface bridge port add bridge=bri-lan interface=ether1 add bridge=bri-lan interface=wifi1 /interface wifi set [ find default-name=wifi1 ] \ channel.frequency=5180-5240:2…

A given device may (or may have not) a set of Quickset modes. These are "helpers" that (again only used once and on a new and/or reset device) give the possibility to configure simply a device (intended for people not very familiar with Mikrotik). If you have them (the "right" ones for your case),…

A given device may (or may have not) a set of Quickset modes. I don’use quickser so I don’t know anything about it… where can i see those “quickset modes”? if you paste the line I posted in my last post it will not execute… I’m not near my device now but i will copy paste what is happenig so you …

Quickset is (should be) first top item on the left when you access your router in Winbox. If you are not using Winbox, you should, in case: [image] Why you should use Winbox Useful user articles Preamble and disclaimer: The following is a set of consideration…

[image] satman1w: I don’use quickser so I don’t know anything about it… where can i see those “quickset modes”? After you reset your device to the default configuration, the Quick Set dialog will popup after the first login. In WinBox you can also access it here anytime: [image] [image] Ho…

I do not have one LHG-5axD-XL, but if the website is right, with Level 3 licence can not act a "access point with bridge" ap-bridge mode, but only as station/station-bridge. Since WiFi do not have "only bridge" mode, you can not use it as PtP. Then things changed from RouterOS v6 to v7, but again…

From https://mikrotik.com/product/lhg_5_ax_xl : ”Whether you’re bridging two buildings,” or “ideal for point-to-point links over great distances”. So they are selling this product as PtP solution.

Yes, but it's still an L3... Let's see what happens...

Generally on those they’d set the AP side as “bridge” and client side as “station bridge”. I haven’t been successful in bridging with v7 with the ac/ax-specific packages, but I also haven’t tried with the more recent releases.

I gave up attempting to understand MIkrotik license levels a long time ago, but the wireless wire kit (using wAPs): https://mikrotik.com/product/wireless_wire is provided with a level 3 license. While the Wireless Wire Cube Pro: https://mikrotik.com/product/wireless_wire_cube_pro have a level 4…

[image] jaclaz: is provided with a level 3 license. But is RouterOS v6 only, where on wireless (not wifi) "bridge" on mode exist (instead of "ap-bridge")

PtP with LHG XL 5 and WiFi package

RouterOS

jaclaz November 6, 2025, 10:06pm 30

I know, rest assured.

Check Rule #4 of the Mikrotik Club: