RB532 Fried

Hardware MikroTik hardware general
1

Good Evening All,

I have a RB532 that seems to be dead from yesterday night. I upgrade to 3.30 and all was OK. I updated the licence and in this reboot the box didn’t bootup anymore.

I have connected via console and this is the message

RouterBOOT booter 2.9

RouterBoard 532A

CPU frequency: 399 MHz
  Memory size:  64 MB

Press any key within 2 seconds to enter setup..
loading kernel from nand... OK
setting up elf image... OK
jumping to kernel code
Kernel panic - not syncing: No init found.  Try passing init= option to kernel.

I press the key but it seems to be hung during 1 minute or so and after this I got this Kernel Panic. Of course can’t make a net install becouse I get this error when a key is pressed.

It is possible to reload a boot in the box?

Greetings

2

Hi, after power on press any key,go to BIOS then change boot device to ethernet and try reinstall router OS. May choice is 2.9.51

3

Hi all,

It is not possible, the unit does not respond when I press any key, so I can’t go to bios menu.

Greetings

4

Hi all,

I’ve got a RB532 here which simply doesn’t output anything on the serial port. Tried booting with button S1 pressed (to boot from backup BIOS) and still nothing. The blue & orange LED’s just stay lit. Board doesn’t beep or respond on any of the ports.
Any help or links to documents or troubleshooting tutorials would be appreciated. Thanks.

-Antz

5

Check this!
RB532r5.pdf (65.4 KB)
RB532r3.pdf (66.6 KB)