Hi,
I would like to be able to monitor the power readings of all PoE ports on the RB750UP and if possible even the status of the Ports i.e. whether they are in ‘Ready’ state or not.
And idea if the MIB file contains this info? I’ve also downloaded the latest MIB file from the Mikrotik site.
I have also performed SNMPwalk on the device but I cannot seem to identify the OID’s.
Any help appreciated.
Rgds,
Mark.
Deleted because not related.
Hi Doby,
Maybe I’ve not made myself clear. I am actually using both the Dude and PRTG and these both work fine.
What I need are the OID’s for the info about the power of the PoE ports on the RB750UP i.e. ether1 to ether5.
What I need is to get the following info via SNMP -
[admin@XXXXXXX] > /interface ethernet poe monitor [find]
name: ether2 - AP-East ether3 - AP-West ether4 - AP-North ether5 >
poe-out-voltage: 11.5V 11.5V
poe-out-current: 440mA 320mA
poe-out-power: 5W 3.6W
What interests me is the stuff in bold, i.e. the voltage, power and current readings of the ports.
Thank you in advance.
Rgds,
Mark.
will see what we can do about this, ATM this is not available (as you have noticed) via SNMP
Hi,
Waiting for it then 
.
Thank you to all.
Rgds,
Mark.
With RouterOS 6.0 :
snmpwalk -v1 -c <ip_address> .1.3.6.1.4.1.14988.1.1.15
Hi,
Post it’s old but it might interest someone
Here the info of my RB750UP 6.27 / 3.22 snmp walk
ETHER NAME
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.2.2
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.2.3
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.2.4
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.2.5
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.2.2”)]
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.2.3”)]
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.2.4”)]
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.2.5”)]
POE OUT VOLTAGE
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.4.2
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.4.3
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.4.4
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.4.5
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.4.2”) /10] V
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.4.3”) /10] V
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.4.4”) /10] V
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.4.5”) /10] V
POE OUT CURRENT
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.5.2
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.5.3
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.5.4
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.5.5
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.5.2”)] mA
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.5.3”)] mA
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.5.4”)] mA
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.5.5”)] mA
POE OUT POWER
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.6.2
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.6.3
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.6.4
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.15.1.1.6.5
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.6.2”)] W
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.6.3”)] W
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.6.4”)] W
[oid(“1.3.6.1.4.1.14988.1.1.15.1.1.6.5”)] W
I hope it will help