Routerboard 133c Slow using Winbox

RouterOS Beginner Basics
1

Hi All

I need some help please. I am relatively new to the world of ROS and RB’s. I have a rb133c. Recently when I try and log onto it via WInbox using a network cable it is extremely slow on loading the pages, i.e. if i click on queues it takes about 1 minute to refresh the window with data. What also happens constantly after a few minutes of working with it it disconnects me. Then when I try and log back onto the rb it freezes on the logging in window. I either have to switch it off and on again or wait a while before I can log back in. I have also tried logging in via a telnet client but it is also extremely slow. :frowning: Please help…

2

What version of ROS is on your 133?

3

That was fast :wink:

Was running 2.9.43 then when I got this problem someone told me to upgrade to 2.9.44 to solve the problem but it didn’t help.

4

MAke sure your network is sound and don’t connect via MAC. Use the router IP.

This wasn’t so fast. :slight_smile:

5

I guess you are using connection by Layer 2 (MAC address) and enabled encryption :slight_smile: