Hello colleagues,
I have 6.46.8 (yeah, I know, it’s a bit outdated, but have no chance to update it now) OS on RB2011 and hit some strange problem.
Here’s config snippet regarding VRF:
[admin@Test-MT] > /ip route vrf print
Flags: X - disabled, I - inactive
0 routing-mark=VRF_RED interfaces=ether9
[admin@Test-MT] > ip route rule print
Flags: X - disabled, I - inactive
0 src-address=172.23.51.176/29 action=lookup table=VRF_RED
Network 172.23.51.176/29 is on the ether9 interface.
And the problems start when I do /ip route vrf disable numbers=0 - even General Routing Table stops working (no traffic passing through or to this MT). Is this intended behavior or should I fire detailed bug report?
WBR,
Konstantin