Good morning solved on problem here… a new one rise there… :frowning: A customer where I placed one wAP ac LTE6 kit called me because the premise where the unit was installed was going offline but switching off and on the power was solving. I had a look and this is the problem. The unit is worki…

Funny, I too am just experiencing this Sim Card issue. Its -26 Deg C outside ambient. I have the LtAP in a cabinet. The system board temp in health was reading -1C when I first had this issue. I do not think this has been this low before, but I may be wrong. I checked my libre logging, and it h…

Funny, I too am just experiencing this Sim Card issue. Its -26 Deg C outside ambient. Yeah, never thought about this. But perhaps different SIM cards have a different temperature tolerances? Obviously, the carrier decides what brand/model/etc SIM, so it’s not like you get a “cold weather SIM…

I do use LTE devices, some of them are WAP both with LTE and LTE6 cards, LHG, WAP AC etc… From my experience you have to carefully place the card in the SIM slot… Sometimes, especially when an adapter is used, it might be a little more difficult to place it in position. Maybe if you applied extra …

Oh I wasn’t discounting any of this… More that –26ºC is pretty cold, an element I hadn’t consider re SIM cards. But “SIM NOT INSERTED” likely happen for a lot of reason BEFORE getting to tempature. From my experience you have to carefully place the card in the SIM slot… Sometimes, especially whe…

Don’t know if you want to call this solved… BUT, mine now connects. System Health is at 26 Deg C. Now I am sure it would of worked before, but I was sleeping so I did not get a chance to try it at any temps between 1 Deg C and 26. I did LITERALLY nothing other than disbaled the LTE interface, the…

Fascinating. Running a speedtest to generate CPU load, to generate HEAT, to get a SIM card working – this certainly isn’t a problem in California. Hard to know exactly why – Interesting it cut off at –25ºC, which is what seems like the spec for SIM cards. While the LtAP is rated down to -40°C.

Hi. It seems that there is a design flaw somewhere by the sim card holder. I am interested to know what exactly the guy who said he soldered the circuit board did. Like how can we fix this issue ourselves, as it’s frustrating for myself, as well as for the customer. TIA Clive

I am seeing the same issue with the LHG LTE6, I setup inside and then mounted the ant to a perm bracket outside. Inside I was getting pretty good signal and no issue but it seems that the act of moving the the dish flexes the thing enough to stop the SIM connecting consistently. Pretty poor design T…

I’m also experiencing issues with the SIM card slot on a “wAP LTE kit”, one of the contacts seem to be faulty. This is not ok, Mikrotik! I contacted the local distributor and they said they can’t even fix it, even if I pay for the repair. If you are shipping products with faulty/bad quality componen…

SIM NOT INSERTED

RouterOS Wireless Networking

Amm0 March 15, 2025, 6:58pm 27

More specifically Emils@MT answer here: