Simple question - how to setup a wds bridge in v3rc4

RouterOS General
1

Of course no documentation is out yet in v3. I have tried to get a simple transparent half of full duplex bridge configuration working in v3 on RB333. For full duplex I used Nstreme dual config and was not able to get the ether interfaces to bridge traffic. In half duplex have tried wds configs I used in v2.9 with many tweaks with no sucess. I am certian I am doing something silly but after 8 hours this weekend it still isn’t running. If someone has a working config for full or half duplex transparent bridges I work appreciate the info.

By the way I was amazed I could get 70+Mb over the wireless link while generating the traffic on the RB333 board.

Thanks

2

It is allowed to put in the bridge Nstreme-dual interfaces - so there are no need for WDS - just assign nstreme-dual and ethernet to the bridge

Force bridge to take mac address from the ethernet (admin-mac option) - I think it is not good to assign MAC address automatically, especially when one of the choses are also assigned automatically (nstreme choose mac address from one of the slave interfaces)