Slow ping values through pppoe

RouterOS General
1

Hello, I have the following setup: MT 2.9.1 on a PC with 5 ethernet cards, 4 of them bridged and configured to handle pppoe clients, the fifth one is the public interface. Windows XP pppoe clients are connecting well, but:

If I ping MT from XP I get constantly 9 ms ping values.
More interesting: if I ping the XP client from MT, I get 1,2,3,4,5,6,7,8,9 ms values in cycle!
I tried

  • to change the hardware (motherborad and ethernet cards),
  • go back to MT 2.8.28
  • only one eth. card and no bridging
  • to play with pppoe services’ max MTU and MRU,
    but no difference.

I can’t figure out what is wrong, please help.
Thanks.

2

See sunject :frowning:

3

I mean “subject” :slight_smile:

4

One thing could be that ms windows has not nearly as accurate timer as your average linux/unix. This will make pinging from windows less accurate than routeros.

5

Thank you Sten,
yes, a M$ suck again. I installed Linux onto the same machine, set up the pppoe client and now pings are <1ms.
You won a beer from me in Prague nex year january :slight_smile: