Static IPv6 addresses inside a DHCPv6-PD prefix become permanently deprecated ~8h after creation — lease lifetimes stamped once, never refreshed on renew (7.23.3)

Like I wrote, try 7.24rc4 first, because at least that version fixes the issue with the displayed / printed values of Valid and Preferred.

But I've been using these settings for several years on all my devices:

/ipv6 nd prefix default
set preferred-lifetime=10m valid-lifetime=10m

And have never had the "deprecated" issue you encountered. As long as the router is running, all the statically configured ULA and GUA prefix (that I "borrow" from Hurricane Electric to use internally because they don't suffer from the priority issue of ULA) never become "deprecated" on the devices in the VLANs.

And I need to keep the two default values short because my ISP gives out new GUA prefixes at each redial, which includes each router reboot, and RouterOS doesn't remember the previous prefixes obtained from the ISP across reboot. Keeping long lifetime means my devices retain bogus GUA prefixes every time the router has to reboot (like after an upgrade) and have broken IPv6 connectivity. With the short lifetime, the broken period only lasts at most 10 minutes.

It only breaks if the router is offline for more than 5 minutes. Which never happens for me, except for power outages, but then all other devices are off too.

Again, that short lifetime has never given me IPv6 problems. The only problem I had was when MikroTik decided to do this change in 7.21:

Which unfortunately caused the advertised lifetimes in the RA to be as long as what the DHCPv6 server from the ISP set (which is 5h in my cases). I've complained about this:

V7.21rc [testing] is released! - Announcements - MikroTik community forum

And proposed a compromise:

Which MikroTik has implemented in 7.24:

(in the meantime, I had to use a script to make RouterOS "remember" the prefixes from before a reboot: Ipv6 address deprecation - #20 by CGGXANNX)

Not everyone has the luxury of owning a static GUA prefix.

Anyway, try to set VALID = PREFERRED in the setting and I think your static prefixes will no longer be deprecated.