I want to block some kind of traffic at given time.
I have created firewall rule and checked “time” at “Extra”
options, but it seems NOT working. If i disable “time”
it works (block given kind of traffic). If i enable
anch set time for that rule - it does’not wor. Why?
How to set time based rules?
Your clock is correct??? Use NTP client to sync the clock.
Use GMT hour
Maximiliano
Thank you.
The problem was with local time. I was setting time-based
rule for local time, not for GMT. I have set it for GMT and
it’s OK.
I think it’s stupid setting rules for GMT, not for local time.
Thanks a lot for fast answer.
I have another question about Time Based Rules.
How to make rule working only beetween 23:00 to 06:00 (only at night)?
When i want to set time 23:00-06:00 - the MT is generating
answer that :“start time bigger than end time”
So - how to set this rule???
apparently you will need 2 rules - 1 for 23:00-04:00 second 00:00-06:00
I think that should be:
apparently you will need 2 rules - 1 for 23:00-> 00:00 > second 00:00-06:00
Not, must be the first from 23:00:00 to 23:59:59 and the second from 00:00:00 to 06:00:00
or only one rule:
from 23:00:00 to 1d 06:00:00
did that rule work??
Not, must be the first from 23:00:00 to 23:59:59 and the second from 00:00:00 to 06:00:00
or only one rule:
from 23:00:00 to 1d 06:00:00
first rule working . . .
Hello all,
I am faced with some sort of similar problem. I was asked to block internet connectivity in a mikrotik router and allow traffic from some time.
What I want is to allow traffic or internet connectivity from 7:00 - 16:00 but block internet connectivity on the network from 17:00 to 6:00am.
I need the steps or firewall to achieve this step.s
Thanks
I posted an example here:
http://forum.mikrotik.com/t/firewall-rules-for-time-based/86168/7