Traffic Monitor/Site Blocking

RouterOS General
1

Dear All,
I am trying to block some sites i.e mega.io and tring to capture there service ip’s with the following RAW rule so i can block them, but there is now traffic/ip’s captured. On the other hand all the traffic is passing through the mikrotik with no clue. Can some one guide me on this.

add action=add-dst-to-address-list address-list=“mega IPS” address-list-timeout=4w2d chain=prerouting comment=“mega IPS” in-interface=ether5 protocol=tcp src-address=172.16.16.0/24 tls-host=mega.io*
add action=add-dst-to-address-list address-list=“mega IPS” address-list-timeout=4w2d chain=prerouting comment=“mega IPS” in-interface=ether5 protocol=tcp src-address=172.16.16.0/24 tls-host=mega.nz*
add action=add-dst-to-address-list address-list=“mega IPS” address-list-timeout=4w2d chain=prerouting comment=“mega IPS” in-interface=ether5 protocol=tcp src-address=172.16.16.0/24 tls-host=mega.co.nz*


Regards
RMAK

2

Dear All,
As of below snapshot, after 24 hours no traffic is detected. Any one please share any clue how to solve this.
mega.io firewall rules.PNG
Regards
RMAK

3

The rules from the first post do not match that ones from the next post. You limit the second rules to ports 80 and 443 only.

Share your whole configuration but limiting https connections is not easy. Search forum for “block website etc.” … the ansewer is “you have to invest much more money” :frowning:

4

In my second post i tried by adding ports too but it will not work. I think there might be some way to block those links, may be some one have some clue on it.

5

As already suggested, read this (one of many other topics about blocking): http://forum.mikrotik.com/t/how-to-block-youtube-effectively/175599/1