Of course not LOL.
Its for access OFF the bridge. 
But fair question seeing as I am guilty of not providing proof
testaccess is the name of the virtual WLAN I am using.
…
# dec/29/2021 23:49:07 by RouterOS 7.1
# model = RBcAPGi-5acD2nD
/interface bridge
add ingress-filtering=no name=bridgegym vlan-filtering=yes
/interface ethernet
set [ find default-name=ether2 ] name=emergaccess
/interface vlan
add interface=bridgegym name=cerv49 vlan-id=51
add interface=bridgegym name=homeVlan vlan-id=12
add interface=bridgegym name=mediaVlan vlan-id=40
/interface list
add name=manage
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk disable-pmkid=yes eap-methods="" \
management-protection=allowed mode=dynamic-keys name=media_Security \
supplicant-identity=""
add authentication-types=wpa2-psk disable-pmkid=yes eap-methods="" \
management-protection=allowed mode=dynamic-keys name=home_Security \
supplicant-identity=""
add authentication-types=wpa2-psk disable-pmkid=yes eap-methods="" \
group-key-update=24m mode=dynamic-keys name=Cerv_key supplicant-identity=\
""
add authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys name=\
testprofile supplicant-identity=""
/interface wireless
set [ find default-name=wlan2 ] band=5ghz-onlyac channel-width=20/40mhz-Ce \
country=canada disabled=no frequency=5500 mode=ap-bridge name=homeWLan \
security-profile=home_Security skip-dfs-channels=all ssid=Home_Gym \
wireless-protocol=802.11 wmm-support=enabled wps-mode=disabled
set [ find default-name=wlan1 ] band=2ghz-g/n basic-rates-b="" country=canada \
disabled=no frequency=2437 mode=ap-bridge name=mediaWlan rate-set=\
configured security-profile=media_Security skip-dfs-channels=all ssid=\
Entertainment supported-rates-b=11Mbps wireless-protocol=802.11 \
wmm-support=enabled wps-mode=disabled
add disabled=no keepalive-frames=disabled mac-address=.............. \
master-interface=mediaWlan multicast-buffering=disabled name=testaccess \
security-profile=testprofile ssid=testaccess wds-cost-range=0 \
wds-default-cost=0 wmm-support=enabled wps-mode=disabled
add disabled=no keepalive-frames=disabled mac-address=.................. \
master-interface=mediaWlan multicast-buffering=disabled name=HVAC_WLAN \
security-profile=Cerv_key ssid=Cerv2 wds-cost-range=0 wds-default-cost=0 \
wmm-support=enabled wps-mode=disabled
/interface bridge port
add bridge=bridgegym frame-types=admit-only-untagged-and-priority-tagged \
interface=homeWLan pvid=12
add bridge=bridgegym ingress-filtering=no interface=ether1
add bridge=bridgegym frame-types=admit-only-untagged-and-priority-tagged \
interface=HVAC_WLAN pvid=51
add bridge=bridgegym frame-types=admit-only-untagged-and-priority-tagged \
interface=mediaWlan pvid=40
/ip neighbor discovery-settings
set discover-interface-list=manage
/interface bridge vlan
add bridge=bridgegym tagged=ether1,bridgegym untagged=homeWLan vlan-ids=12
add bridge=bridgegym tagged=ether1 untagged=mediaWlan vlan-ids=40
add bridge=bridgegym tagged=ether1 untagged=HVAC_WLAN vlan-ids=51
/interface detect-internet
set detect-interface-list=manage internet-interface-list=manage \
lan-interface-list=manage
/interface list member
add interface=homeVlan list=manage
add interface=emergaccess list=manage
add interface=testaccess list=manage
/ip address
add address=192.168.1.71/24 interface=homeVlan network=192.168.1.0
add address=192.168.68.2 interface=emergaccess network=192.168.68.0
add address=192.168.6.1/24 interface=testaccess network=192.168.6.0
/ip dhcp-client
add interface=bridgegym
/ip dns
set allow-remote-requests=yes servers=192.168.1.1
/ip route
add disabled=no dst-address=0.0.0.0/0 gateway=192.168.1.1
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set api disabled=yes
set winbox address=192.168.1.0/24,192.168.68.0/24,192.168.6.0/24 port=9091
set api-ssl disabled=yes
/system clock
set time-zone-name=America/Halifax
/system identity
set name=capac-gym
/system ntp client
set enabled=yes
/system ntp client servers
add address=192.168.1.1
/system routerboard settings
set cpu-frequency=auto
/tool mac-server
set allowed-interface-list=none
/tool mac-server mac-winbox
set allowed-interface-list=manage