Hi everyone,
Recently I got a few Rb532A s and trying to run them as an AP.
My setup is
RB532A (400mhz) with RB502 + xr2 + 2x R52 + eth1 (up)
It is powered with 18v power adapter.
i have another computer running as a hotspot.
192.168.178.1 ---- Hotspot IP eth2
212.xxxxx ---- WAN IP
eth2 is connected with eth1 with a cat5.
I want to use the RB only as an AP and computer to do the Hotspot.
Eth1 on RB — 192.168.179.1
First I have bridged all ports together on the RB.
bridge ports — eth1 + and all wireless interfaces
Then added 179.1 to the ip bindings list as BYPASSED in the computer hotspot.
it worked good for a few minutes than the pings went abnormally high like 2000ms and suddenly it went off. Rite now its working with high latency with a lot of timeouts. (both to 178.1 and 179.1)
System is unstable and not funcioning as expected.
Now im thinking a way to do it with routing but tried a few things it doesnt work.
can someone please help on routing the wireless interfaces to the hotspot server instead of bridging ?